home *** CD-ROM | disk | FTP | other *** search
- Path: Belgium.EU.net!news
- From: Amiga.City@ping.be (Amiga City)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Artec A600C scanner
- Date: 20 Apr 1996 13:03:34 GMT
- Organization: EUnet Belgium, Leuven, Belgium
- Message-ID: <949.6684T785T2112@ping.be>
- References: <4hd6jm$39hf@trout.ab.umd.edu>
- NNTP-Posting-Host: dialup01.brussels.eunet.be
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP) *UNREGISTERED*
-
- >First - I ended up buying a macinquash scanner (an Artec A600C, made
- >by Ultima, anyone willing to give absolution?) for my AMax IV card. It
- >works OK, but ...
-
- >Now, the question, is there a native Ami driver for this scanner that
- >anyone knows about, if so, I would love to hear about it.
-
- Scantool, made in germany by Elaborate Bytes works fine. It is a stand-
- alone program with the option of using it from ADPro (pops on ADPro screen),
- it works fine but do not allows a very precise choise of 'to-be-scanned'
- section (no zoom in).
-
- Works here on A4000T / Warp040 & A3000T/A3640
-
- Best regards.
-
- Eric
-
- --
- <tsb>Amiga City - Home of Real Amiga Lovers
- <tsb>'Love All, Serve All' - As long as they have an Amiga ;)
-
- <tsb>E-Mail adress : Amiga.City@ping.be / Eric.Vannueten@ping.be
- <tsb>These words and opinions _are_ to be confused with the ones of my employer
- <tsb>A500 / 600 / 1000 / 1200 / 2000 / 3000 / 4000 : I've got them all...
- <tsb>
-
-